How to Replace a Saab 9-3 Key
The Saab 9-3 has a good variety of appeal to drivers. It is a powerful engine with excellent visibility. It also has an excellent safety rating.
It is nevertheless important to make sure that you have at minimum two keys working for your car. If you lose just one key, it can be costly to purchase a new one.
How to Replace the Ignition Key in the Saab9-3
If your car's key doesn't turn on it is time to replace it. This guide will walk you through the steps to do it on the Saab 9-3. You will need a replacement key as well as a reprogrammable battery and a new key-fob case.
As opposed to earlier models, modern Saab cars use an electronic transponder inside the key-fob instead physical metal key to unlock and start the vehicle. The rechargeable batteries contained in the key-fob will eventually wear out, and they can't hold any charge. This is especially relevant if you use the same key for the same lock.
The good news is that the battery can be replaced fairly easily by a professional locksmith. If you've got the right tools, and a little patience, you can do it yourself. The first step is to take the key-fob off. This is done by inserting a flathead screwdriver into the slot in the middle of the case. You will need to take your time, as the plastic is very thin and can be damaged easily.
After the case is opened, you can make the new key by combining lower part of the key from earlier with a transponder and banana. This will ensure the new key is properly paired to your CIM and could make a significant difference when replacing the sole key of your Saab 9-3.
How to replace saab key www.g28carkeys.co.uk in a Saab 900
If you don't have two keys you will need remove the dashboard and steering wheel in order to access the ignition. Begin by disconnecting the negative battery cable. Once the battery is disconnected, it is possible to remove the dashboard and trim pieces around the steering wheel. After the dashboard is removed, you can insert a screwdriver into the opening in the back of the ignition switch and remove it.
The ignition cylinder is fitted with a key lock which could stop the vehicle from starting if you don't have a key. If the ignition switch on your 900 doesn't work correctly, make sure to check whether the key is in the lock or snared within the ignition barrel. You should also rotate your keys and keep them clean to avoid breaking.
Saab cars differ from other cars because they do not have traditional metal keys. Instead, the car is able to recognize electrical signals that come from the key fob by using the use of a special microchip.
If you only lose one working key fob, your dealer will charge you a premium to replace your computer module (also known as the CIM). However, we can reprogram your existing computer's EEPROM and set it to accept new keys without replacing it. This can save you more than 50% of what the dealer charges! This is the SAAB KEY PROGRAM. Find out more about it here!
How do you replace the ignition Key in a Saab9-5
The metal portion of a classic Saab key is easy to duplicate, and it's also not much of an impediment against theft of a vehicle. The real protection is the electronic component that's in the key fob, which has a chip inside that can recognize your vehicle when it's inserted into your ignition switch.
Saab has relied on the technology of this anti-theft system for over 10 years. It's not as efficient as a physical lock for your door, but it makes stealing your car much more difficult. Every Saab owner must keep a spare Saab key in their car.
The majority of new Saabs come with two keys in the factory. However, you can buy more keys from an authorized dealer using a handheld computer called Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this rule is NG 9-3 vehicles, that have more modern, more advanced features that require keys-fobs.
If you lose all keys or keys, the dealer will replace your CIM or TWICE modules, and charge you a premium for it. We can reprogram your computer's EEPROM to accept new keys, without replacing expensive modules.
How do I replace the ignition Key on the Saab XC90
If your SAAB 9-3 key fob begins experiencing issues turning the barrel of the lock it could be time to replace it. The procedure is quite simple and you don't even need to visit a dealer. Instead you can complete the process yourself at home, using just some basic tools.
In the beginning, you'll need to prepare the new key. Before you begin, turn off the anti-theft by placing blocks underneath your rear wheels, and then releasing your handbrake. Place the key in the ignition, and then turn it to the "on" position. This will activate the accessories but it will not start the engine. Repeat this process five times, then leave the key in the on position.
You'll then have to buy a new case for your key fob. You can find them at any auto parts store, and they're usually quite affordable. They can be purchased without electronics depending on the model.
To open the case simply push the screwdriver with a flathead into the slot in the middle. After you have split the case, you'll be able to access all the internal electronics. To remove the electronics, employ a small screwdriver and try prying them out with a gentle force.